airo 2K Nautic Epoxy Spatula Ultra Lightweight 0,8 Litre light grey 2:1

47,75 EUR
10,61 EUR per
19 % VAT incl. excl. Shipping costs
Shipping time: 3-4 Days
Product no.: N001R80
GTIN/EAN: 4003204110038
MPN: N001R80


Products description

airo 2K Nautic Epoxy Spatula Ultra Lightweight 0,8 Litre light grey 2:1

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


AIRO Nautic lightweight epoxy PuTTY 2-1 ultra lightweight 0.8 litre light grey

  • Model: NP01R38
  • EAN: 4003204110052
  • Weight: 0,5 kg
  • Manufacturer: Xavier chemistry
  • Brand: Xavier chemistry
  • Manufacturer number: NP01R38

Description

2 K Nautic epoxy PuTTY ultra lightweight light grey 2:1

0.8 litres at a weight of only 480 g
Ultra lightweight distinguishes itself by an extremely low specific weight
Density of 0.5 - 0.7 g/l, lighter than water

Properties:
2-component filler on epoxy resin base with a wide range of application.
Fast-curing, good sanding, water resistant.
Suitable for the removal of Osmosis damage on Fiberglass boats.
Excellent adhesion on steel, iron and cast aluminium, Fiberglass parts.

Application:
Boat repair, machine finish.
Can be used for repairs to boats in the above and underwater applications.

Chemical basis:
Nautic: epoxy resin, fillers, pigments, Thixmittel.

Instructions for use:
The surface must be clean and free of grease. Roughen the surface before filling with a jet of sand or coarse sandpaper. Base and hardener in a ratio of 2:1 mix and apply. The mixture remains about 55 - 65 minutes workable. The scraper is grindable after 6 to 7 hours (depending on hardener) drying time. At temperatures below 20 ° C are used, the curing time will be extended. The ground scraper can be painted over with all commercially available paints.

Steel or aluminium boats should be before the filler 2-components-corrosion protection primer is applied.


Pot life:
Base and hardener in a ratio of 2:1 mix and apply.
The mixture remains about 55-65 minutes workable.
The scraper is grindable after 6 to 7 hours drying time.
At temperatures below 20 ° C are used, the curing time will be extended.

Mixture:
2 parts by weight of Nautic ultra light base
1 weight part of Nautic ultra light curing agent

Working temperature:
Should the ambient and material temperature during processing between + 18 ° C and + 25 ° c.
Not below + 5 ° C process!

Disposal:
Dispose of according to the local regulations.

Loops:
with paper P 80-280

Storage stability:
At + 20 ° C in tightly closed containers at least 12 months.


Financing

Bound annual borrowing rate 9,14 excl. Handling fee. Effect. APR 9,9

Reference
Here you can enter a general indication, eg for the purchase or your corporate philosophy. Again, you can use DotLiquid variables, eg other Global texts as
About Us

Describe your inhibitor-augsburg company in a few short sentences here.

Herstellernummer NP01R38
Marke airo chemie
EAN 4003204110052
Anzahl der Einheiten 0,8
Maßeinheit l

Customers who bought this product also bought the following products:

This Product was added to our catalogue on 08/04/2013.