Properties: 2-component filler on epoxy resin base with a wide range of application. Fast-curing, good sanding, water resistant. Suitable for the removal of Osmosis damage on Fiberglass boats. Excellent adhesion on steel, iron and cast aluminium, Fiberglass parts.
Application: Boat repair, machine finish. Can be used for repairs to boats in the above and underwater applications.
Chemical basis: Nautic: epoxy resin, fillers, pigments, Thixmittel.
Instructions for use: The surface must be clean and free of grease. Roughen the surface before filling with a jet of sand or coarse sandpaper. Base and hardener in a ratio of 2:1 mix and apply. The mix remains workable approx. 15-20 minutes. The scraper is grindable after 6 to 7 hours drying time. At temperatures below 20 ░ C are used, the curing time will be extended. The ground scraper can be painted over with all commercially available paints.
Steel or aluminum boats a good 2-components-corrosion protection primer should be applied before the spatula.
Pot life: Base and hardener in a ratio of 2:1 mix and apply. The mix remains workable approx. 15-20 minutes. The scraper is grindable after 6 to 7 hours drying time. At temperatures below 20 ░ C are used, the curing time will be extended.
Mixture: 2 parts by weight of Nautic base 1 weight part of Nautic hardener
Working temperature: Should the ambient and material temperature during processing between + 18 ░ C and + 25 ░ c. Not below + 5 ░ C process!
Disposal: Dispose of according to the local regulations.
Loops: with paper P 80 - 280
Storage stability: At + 20 ░ C in tightly closed containers at least 12 months.